Show Zoneset - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show zoneset

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show zoneset
To display the configured zone sets, use the show zoneset command.
Syntax Description active
vsan vsan-id
brief
name zoneset-name
pending
Command Default None
Command Modes EXEC mode.
Command History Release
4.0(0)N1(1a)
Examples The following example displays configured zone set information:
switch# show zoneset vsan 1
The following example displays configured zone set information for a specific VSAN:
switch# show zoneset vsan 2-3
Cisco Nexus 5000 Series Command Reference
9-56
show zoneset [active [vsan vsan-id] | brief [active [vsan vsan-id] | vsan vsan-id] | name
zoneset-name [active [vsan vsan-id] | brief [active [vsan vsan-id] | vsan vsan-id] | vsan
vsan-id] | pending [active [vsan vsan-id] | brief [active [vsan vsan-id] | vsan vsan-id] | vsan
vsan-id] | vsan vsan-id
(Optional) Displays only active zone sets.
(Optional) Displays the VSAN. The range is 1 to 4093
(Optional) Displays zone set members in a brief list.
(Optional) Displays members of a specified zone set.
(Optional) Displays zone sets members that are in session.
Modification
This command was introduced.
Chapter 9 Fibre Channel Show Commands
OL-16599-01