Name (Vlan Configuration) - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 2 Ethernet Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

name (VLAN configuration)

To set the name for a VLAN, use the name command. To remove the user-configured name from a
VLAN, use the no form of this command.
Syntax Description
vlan-name
Command Default
None
Command Modes
VLAN configuration mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines
You cannot change the name for the default VLAN, VLAN 1, or for the internally allocated VLANs.
Examples
This example shows how to name VLAN 2:
switch(config)# vlan 2
switch(config-vlan)# name accounting
Related Commands Command
show vlan
OL-16599-01
name vlan-name
no name
Name of the VLAN; you can use up to 32 alphanumeric, case-sensitive
characters. The default name is VLANxxxx where xxxx represents four
numeric digits (including leading zeroes) equal to the VLAN ID number, for
example, VLAN0002.
Modification
This command was introduced.
Description
Displays VLAN information.
name (VLAN configuration)
Cisco Nexus 5000 Series Command Reference
2-35