Show Fspf - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 9 Fibre Channel Show Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show fspf

To display global Fibre Shortest Path First (FSPF) routing information, use the show fspf command.
Syntax Description database
vsan vsan-id
detail
domain domain-id
interface
fc slot/port
san-port-channel
port-channel
Command Default
None
Command Modes EXEC mode.
Command History Release
4.0(0)N1(1a)
Usage Guidelines
If you enter the command without parameters, all the entries in the database are displayed.
Examples The following example displays FSPF interface information:
switch# show fspf interface vsan 1 fc2/1
The following example displays FSPF database information:
switch# show fspf database vsan 1
This command displays FSPF information for a specified VSAN:
switch# show fspf vsan 1
OL-16599-01
show fspf [database [vsan vsan-id] [detail | domain domain-id detail] | interface | vsan vsan-id
interface {fc slot/port | san-port-channel port-channel}]
(Optional) Displays the FSPF link state database.
(Optional) Specifies the VSAN ID. The range is 1 to 4093.
(Optional) Displays detailed FSPF information.
(Optional) Specifies the domain of the database. The range is 0 to 255.
(Optional) Specifies the FSPF interface.
Specifies the Fibre Channel interface to configure.
Specifies the port channel interface. The range is 1 to 256.
Modification
This command was introduced.
Cisco Nexus 5000 Series Command Reference
show fspf
9-31