Show Interface Transceiver Fex-Fabric - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show interface transceiver fex-fabric

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show interface transceiver fex-fabric
To display information about all transceivers connected to fabric interfaces, use the show interface
transceiver fex-fabric command.
Syntax Description calibration
detail
Command Default None
Command Modes EXEC mode
Command History Release
4.0(1a)N2(1)
Examples This example shows how to display information about all transceivers that connect to fabric interfaces:
switch# show interface transceiver fex-fabric
Related Commands Command
show fex
Cisco Nexus 5000 Series Command Reference
4-20
show interface transceiver fex-fabric [calibration | detail]
(Optional) Displays detailed calibration information about the transceiver.
(Optional) Displays detailed diagnostic information about the transceiver.
Modification
This command was introduced.
Description
Displays all configured Fabric Extender chassis connected to the switch.
Chapter 4 Fabric Extender Commands
OL-16599-01