Chapter
show mac address-table count
To display the number of addresses present in all VLANs or the specified VLAN, use the show mac
address-table count command in user EXEC mode.
Syntax Description
bridge-domain
number
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(52)EY
Usage Guidelines
If no VLAN number is specified, the address count for all VLANs appears.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show mac address-table count command:
Switch# show mac address-table count
Mac Entries for vlan 1:
---------------------------
Dynamic Address Count
Static
Total Mac Addresses
Mac Entries for vlan 2:
---------------------------
Dynamic Address Count
Static
Total Mac Addresses
Mac Entries for vlan 3:
---------------------------
Dynamic Address Count
Static
Total Mac Addresses
OL-28238-01
show mac address-table count [bridge-domain number] [vlan vlan-id] [ | {begin | exclude |
include} expression]
(Optional) Displays the number of addresses for a specific Ethernet Flow Point
(EFP) bridge domain. The range is 1 to 8000.
(Optional) Displays the number of addresses for a specific VLAN. The range is 1 to
4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
: 69
Address Count
: 0
: 69
: 0
Address Count
: 0
: 0
: 52
Address Count
: 0
: 52
Cisco ME 3800X and ME 3600X Switch Command Reference
show mac address-table count
-111