Clear Zone - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Cisco nexus 5000 series command reference, release 4.1(3)n1(1) (ol-16599-01, august 2009)

Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:

Table of Contents

Fibre Channel Commands

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

clear zone

To clear all configured information in the zone server for a specified VSAN, use the clear zone

Syntax Description

Command Default

Command Modes

Command History

4.0(0)N1(1a)

Usage Guidelines

After entering a clear zone database command, you need to explicitly enter the copy running-config

startup-config to ensure that the running configuration is used when you next start the switch.

When you enter the clear zone lock command from a remote switch, only the lock on that remote switch

is cleared. When you enter the clear zone lock command from the switch where the lock originated, all

locks in the VSAN are cleared. The recommended method to clear a session lock on a switch where the

lock originated is by entering the no zone commit vsan command.

The following example shows how to clear all configured information in the zone server for VSAN 1:

switch# clear zone database vsan 1

Related Commands

clear zone {database | lock | statistics} vsan vsan-id

Clears zone server database information.

Clears a zone server database lock.

Clears zone server statistics.

Clears zone information for a VSAN.

The ID of the VSAN is from 1 to 4093.

Modification

This command was introduced.

Displays zone information for any configured interface.

Cisco Nexus 5000 Series Command Reference