Show Mac Address-Table Count; Show Bridge Multicast Mode - Cisco Sx350 Cli Manual

4
157

4.26 show mac address-table count

To display the number of addresses present in the Forwarding Database, use the
show mac address-table count Privileged EXEC mode command.
Syntax
show mac address-table count [vlan
Parameters
•
vlan
vlan —(Optional) Specifies VLAN.
•
interface-id
interface-id
ID can be one of the following types: Ethernet port or port-channel.
Command Mode
Privileged EXEC mode
Example
switchxxxxxx#
show mac address-table count
This may take some time.
Capacity : 16384
Free : 16379
Used : 5
Secure : 0
Dynamic : 2
Static : 2
Internal : 1
console#

4.27 show bridge multicast mode

To display the Multicast bridging mode for all VLANs or for a specific VLAN, use
the show bridge multicast mode Privileged EXEC mode command.
vlan
| interface
—(Optional) Specifies an interface ID. The interface
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Address Table Commands
interface-id
]