Permit Vrf - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 6 Security Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

permit vrf

To add virtual routing and forwarding instances (VRFs) for a user role VRF policy, use the permit vrf
command. To remove VRFs, use the no form of this command.
Syntax Description
vrf-list
Command Default All VRFs
Command Modes VRF policy configuration
Command History Release
4.0(0)N1(1a)
Examples This example shows how to configure a range of VRFs for a user role VRF policy:
switch(config)# role name MyRole
switch(config-role)# vrf policy deny
switch(config-role-vrf)# permit vrf management
Related Commands Command
vrf policy deny
role name
show role
OL-16599-01
permit vrf vrf-list
no permit vrf
List of VRFs that the user role has permission to access.
Modification
This command was introduced.
Description
Enters VRF policy configuration mode for a user role.
Creates or specifies a user role and enters user role configuration mode.
Displays user role information.
Cisco Nexus 5000 Series Command Reference
permit vrf
6-79