Show Mac Address-Table Count - Cisco Catalyst 2960 Command Reference Manual

show mac address-table count

show mac address-table count
Use the show mac address-table count user EXEC command to display the number of addresses present
in all VLANs or the specified VLAN.
Syntax Description vlan vlan-id
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(25)FX
Usage Guidelines
If no VLAN number is specified, the address count for all VLANs appears.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mac address-table count command:
Switch# show mac address-table count
Mac Entries for Vlan
---------------------------
Dynamic Address Count
Static
Total Mac Addresses
Catalyst 2960 Switch Command Reference
2-396
show mac address-table count [vlan vlan-id] [ | {begin | exclude | include} expression]
(Optional) Display the number of addresses for a specific VLAN. The range is 1
to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
: 1
: 2
Address Count : 0
: 2
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
OL-8604-04