Fcsp Reauthenticate - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 8 Fibre Channel Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

fcsp reauthenticate

To reauthenticate a Fibre Channel or virtual Fibre Channel interface, use the fcsp reauthenticate
command. Use the no form of the command to revert to factory defaults.
Syntax Description
interface
interface fc slot/port
vfc vfc-id
Command Default 30 seconds
Command Modes
EXEC mode
Command History Release
4.0(0)N1(1a)
Examples The following example configures the FCSP reauthentication on a virtual Fibre Channel interface:
switch# fcsp reauthenticate vfc 1
Related Commands Command
fcsp enable
show fcsp
OL-16599-01
fcsp reauthenticate interface { fc slot/port | vfc vfc-id }
no fcsp reauthenticate interface { fc slot/port | vfc vfc-id }
Specifies the interface on which to perform the reauthentication.
Specifies the Fibre Channel interface by slot and port number.
Specifies the virtual Fibre Channel interface by virtual interface group
number and virtual interface ID.
Modification
This command was introduced.
Description
Enable FC-SP.
Displays configured FC-SP information.
Cisco Nexus 5000 Series Command Reference
fcsp reauthenticate
8-73