Fcdomain Commit Vsan - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

fcdomain commit vsan

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
fcdomain commit vsan
To commit cached data and release the lock, use the fcdomain commit vsan command. To release the
lock without committing the cached data, use the no form of the command.
Syntax Description
vsan vsan-id
Command Default Enabled.
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Examples The following example shows how to commit cached data:
switch(config)# fcdomain commit vsan 10
Related Commands Command
fcdomain
fcdomain abort vsan
show fcdomain
Cisco Nexus 5000 Series Command Reference
8-50
fcdomain commit vsan vsan-id
no fcdomain commit vsan vsan-id
Specifies a VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Description
Configures Fibre Channel domain features.
Flushes cached data without committing and releases the lock.
Displays global information about the Fibre Channel domain configurations.
Chapter 8 Fibre Channel Commands
OL-16599-01