Show License Usage - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show license usage

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show license usage
To display license usage information, use the show license usage command.
Syntax Description
PACKAGE
Command Default
Displays license usage for the switch.
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Examples
This example shows how to display information about the current license usage:
switch# show license usage
Feature
--------------------------------------------------------------------------------
FM_SERVER_PKG
ENTERPRISE_PKG
FC_FEATURES_PKG
--------------------------------------------------------------------------------
Table 1-6
Table 1-6
Column
Feature
Ins
Lic Count
Status
Cisco Nexus 5000 Series Command Reference
1-90
show license usage [PACKAGE]
(Optional) Displays a list of licensed features in use for the specified license
package.
Modification
This command was introduced.
describes the columns used in the show license usage command output.
show license usage Columns
Description
Name of the license package.
License installation status. "No" indicates that the license is not installed and
"Yes" indicates that the license is installed.
License count. "-" indicates that the count is not used for this license
package. A number in this field indicates that number of current usages of
the license by features. This field is not supported.
License status. "Unused" indicates that no features that require the license
are enabled. "In use" indicates that one or more features are using the
license.
Ins Lic Status Expiry Date Comments
Count
No - Unused
Yes - Unused Never
Yes - In use Never
Chapter 1 Basic System Commands
-
-
-
OL-16599-01