Fax Tx Encode Output Buffer Over; Fax Rx Encode Output Buffer Over; Scan Encode Output Buffer Over; Fax Rx Decode Input Buffer Over - Fuji Xerox DocuCentre SC2020 Service Manual

• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

033-774 FAX TX Encode Output Buffer Over

BSD-ON:-
In FAX send, JBIG encode output buffer overflow.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Checking
the resolution setting. -Retry sending by lowering the resolution setting. -Update to the latest F/W. If the
error persists after the action above is taken, ensure that the error replicates after the printer is powered
off and then on, and then replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

033-775 FAX RX Encode Output Buffer Over

BSD-ON:-
In FAX receive, JBIG encode output buffer overflow.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Check
the sending side fax machine or retry sending by lowering the resolution setting. -Update to the latest F/
W. If the error persists after the action above is taken, ensure that the error replicates after the printer is
powered off and then on, and then replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

033-776 SCAN Encode Output Buffer Over

BSD-ON:-
In FAX scan and D-FAX scan, JBIG encode output buffer overflow.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Checking
the resolution setting. -Retry sending by lowering the resolution setting. -Update to the latest F/W. If the
error persists after the action above is taken, ensure that the error replicates after the printer is powered
off and then on, and then replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
Version 1.1
DC SC2020

033-777 FAX RX Decode Input Buffer Over

BSD-ON:-
In FAX receive, when copying from ECM buffer to JBIG decode input buffer, input buffer overflow.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Check
the sending side fax machine or retry sending by lowering the resolution setting. -Update to the latest F/
W. If the error persists after the action above is taken, ensure that the error replicates after the printer is
powered off and then on, and then replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

033-779 Log File Create Fail

BSD-ON:-
Cannot create log file of communication result.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Checking
the telephone line connection. Reconnect the telephone line connector. -Checking the sending side fax.
Receive the fax data from known good fax machine. -Update to the latest F/W. If the error persists after
the action above is taken, ensure that the error replicates after the printer is powered off and then on, and
then replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

033-782 NSS/DCS Function disagreement

BSD-ON:-
Received NSS/DCS function disagrees with capability of own terminal.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Set the
Modem Speed correctly. -Update to the latest F/W. If the error persists after the action above is taken,
ensure that the error replicates after the printer is powered off and then on, and then replace the following
parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

033-784 Fax Codec Error

BSD-ON:-
05/2014
2-55
CHAIN 33
Troubleshooting