Fuji Xerox DocuCentre SC2020 Service Manual page 655

6.4.16.1 Scan Counter Clear
Table 1 IIT I/O Check
Item Sensor Status
Counter Clear (FB) Clears the value of the FB scan counter.
Counter Clear (DADF) Clears the value of the DADF scan counter.
Procedure
1. Enter the CE mode. (See "6.4.2 How To Enter the CE Mode")
2. Use the [Down arrow] button to select [Fax/Scanner Diag], and press the [OK] button.
Figure 1 j0bs64170
3. Use the [Down arrow] button to select [Scanner Maintenance], and press the [OK] button.
Figure 2 j0bs641171
Version 1.1
DC SC2020
4. Press the [OK] button.
5. Press the [OK] button.
6. Clears the value of the FB scan counter.
7. Exit the CE mode. (See "6.4.4 How to Exit the CE Mode")
05/2014
6-257
Figure 3 j0bs64172
Figure 4 j0bs64173
Figure 5 j0bs64174
6.4.16.1 Scan Counter Clear
General