Table of Contents
Advertisement
DC SC2020
Version 1.1
Figure 5 j0lbs34011
iv.
Install the Fusing Unit.
(2) Move the adjustment bracket to N -> P when the paper wrinkle appears on the right side.
i.
Temporary tack the Screw in the left P hole.
Figure 6 j0lbs34006
ii.
Fasten the Screw in the right P hole.
05/2014
3.2.2 How to use the image quality troubleshooting (IPS)
3-28
iii.
Tighten the left P Screw.
iv.
Install the Fusing Unit.
3.
Usage flow of the Alignment Adjustment Bracket
NOTE: Use this when pepr wrinkles (*1) has been generated due to interaction.
(1) Paper wrinkle due to interaction
•
Paper wrinkle due to interaction between the Fusing Unit, Transfer, and Regi
•
Cause: The positional relation between the various Sub Rolls is wrong, which degener-
ates the transport form of the paper and results in wrinkles being generated in the Fusing
Unit.
Image Quality Troubleshooting
Figure 7 j0lbs34007
Figure 8 j0lbs34008
Advertisement
Chapters
Table of Contents
Troubleshooting
