Printing After Checking Output - Sample Set; Sample Set; Printing Using Sample Set - Fuji Xerox ApeosPort Print C5570 Reference Manual

4.8

Printing after Checking Output - Sample Set -

Sample Set

Sample Set lets you print a proof copy of a multi-set job and print the rest of the sets after checking the proof copy.
Send
Note

Unnecessary sample print data can be deleted using the same procedure as when printing. For details, refer to "Control
Panel Operations" (P.81).

Printing using Sample Set

Configure Sample Set settings on your computer and then send the job to the machine. Next, operate the machine
to print the job.
Configuring Print Driver Settings
Set [Document Options] > [Paper/Output] > [Copies] to 2 or more on the [Advanced] tab of the print driver and
select [Sample Set] under [Job Type] on the [Paper/Output] tab. This will store the document in the machine.
Refer

For more information about configuring the print driver, refer to the print driver help.
Control Panel Operations
After checking the result of printing just one copy, either print the print data of the remaining copies stored on this
machine or delete the print data.
1.
At the Home screen, tap [Jobs].
2.
At the bottom of the screen, tap [Sample Set].
Note
 When [Sample Set / Delayed Print] is displayed, tap [Sample Set / Delayed Print] > [Sample Set].
 When [Other Jobs] is displayed, tap [Other Jobs] > [Sample Set].
3.
Tap the folder in which the document is saved.
4.
Tap the document to be printed to select the checkbox.
Note
 To delete print data that has accumulated in this machine without printing the remaining copies, tap [Delete].
5.
Enter the number of copies.
1 set printed
x4
copies
Stored
Proof print is
OK
Something wrong
with proof print.
4.8 Printing after Checking Output - Sample Set -
Print the rest of the sets
using the control panel.
Cancel the job
on the control panel.
81