Fuji Xerox DocuCentre SC2020 Service Manual page 641

6.4.12.1 Initialization (Life) and the display of life counter
Conduct life and display counter value of IIOT and life counter value initialization.
Table 1 Life counter
Item
Deve HSG PV Y
Deve HSG PV M
Deve HSG PV C
Life
Deve HSG PV K
Y Drum Ctrg PV
M Drum Ctrg PV
C Drum Ctrg PV
K Drum Ctrg PV
IBT Unit
2nd BTR Unit
Fusing Print Count
Fusing Time Count
Deodorant Filter
EEPROM Write Cnt
Tray1 F/R/N Roll
Tray2 F/R/N Roll
MSI FR Pad
Operation Procedure
Here are example how to initialize and verify the 2nd BTR Unit life counter value.
1. Enter the CE Mode. (Refer to "6.4.2 How to Enter the CE Mode")
2. Make sure [Printer Diag] is selected, and then press [OK] button.
Version 1.1
DC SC2020
Display/
Threshold initialization
38000 Display/initializa-
tion
38000 Display/initializa-
tion
38000 Display/initializa-
tion
38000 Display/initializa-
tion
68200 Display/initializa-
tion
68200 Display/initializa-
tion
68200 Display/initializa-
tion
68200 Display/initializa-
tion
120000 Display/initializa-
tion
120000 Display/initializa-
tion
100000 Display/initializa-
tion
18000000 Display/initializa-
tion
120000 Display/initializa-
tion
- Display
50000 Display/initializa-
tion
50000 Display/initializa-
tion
50000 Display/initializa-
tion
3. "Parameter" in the [Down arrow] button to select, and then press [OK] button.
4. "Life" in the [Down arrow] button to select, and then press [OK] button.
5. Press the [<--] (Back) button to return to the [Printer Diag] screen.
6. Press the [OK] button, it displays the value.
05/2014
6.4.12.1 Initialization (Life) and the display of life counter
6-243
Figure 1 j0bs64089
Figure 2 j0bs64090
General