Toner K Crum Data Mismatch; Toner K Crum Data Broken; Toner Y Life Over; Toner M Life Over - Fuji Xerox DocuCentre SC2020 Service Manual

• Damage, contamination by foreign substances of the joining terminal between CRUM PWB of
Toner Cartridge (K) and CRUM of Toner CRUM Connector Assembly (K).
• Uncleanness, dislocation of CRUM PWB of Toner Cartridge (K).
• The Toner Cartridge (K) for improper installation
If no problem is found, replace the following parts in sequence:
• Toner Cartridge (K) (PL 5.1)
• Toner CRUM Connector Assembly (K) (Dispenser Drive (CK))
• DRIVE PWB (PL 18.2)

093-926 Toner K CRUM Data Mismatch

BSD-ON:CH9.6
Detected invalid Authentication Area Data of CRUM of Toner Cartridge (K).
Cause/Action
Remove and reinstall the Toner Cartridge (K) and check for improper installation.
Replace with genuine Toner Cartridge (K) (PL

093-928 Toner K CRUM Data Broken

BSD-ON:CH9.6
Detected inequality in write data and read data of CRUM of Toner Cartridge (K).
Cause/Action
Remove and reinstall the Toner Cartridge (K) and check for improper installation.
Replace Toner Cartridge (K) if there is no problem after checking.

093-930 Toner Y Life Over

BSD-ON:CH9.5
Toner Cartridge (Y) has reached its life.
Cause/Action
Replace Toner Cartridge (Y). (PL 5.1)
Version 1.1
DC SC2020
(PL 5.3)
5.1) if there is no problem after checking.
(PL 8.1)

093-931 Toner M Life Over

BSD-ON:CH9.5
Toner Cartridge (M) has reached its life.
Cause/Action
Replace Toner Cartridge (M). (PL 5.1)

093-932 Toner C Life Over

BSD-ON:CH9.6
Toner Cartridge (C) has reached its life.
Cause/Action
Replace Toner Cartridge (C). (PL 5.1)

093-933 Toner K Life Over

BSD-ON:CH9.6
Toner Cartridge (K) has reached its life.
Cause/Action
Replace the Toner Cartridge (K). (PL

093-944 Deve HSG Y Life End

BSD-ON:-
Indicates Deve HSG Y reached its usage limit. (Restrict Print operation)
Cause/Action
Replace the Deve Unit (Y). (PL 5.1)
After replacing, enter CE Mode, go to Printer Diag > Parameter > Life > Deve HSG PV Y and initialize the
Life Counter.

093-945 Deve HSG M Life End

BSD-ON:-
Indicates Deve HSG M reached its usage limit. (Restrict Print operation)
05/2014
2-99
5.1)
Troubleshooting
CHAIN 93