Fuji Xerox DocuCentre SC2020 Service Manual page 811

Figure 6 j0bs91003
9. Install the gear provided in the Kit. (Figure 7)
(1) Put the gear.
(2) Secure it by using the E-Clip that were removed in Step 8.
Figure 7 j0bs91004
10. Connect the wire harness in the Kit. (Figure 8)
(1) Connect the wire harness.
(2) Wire the Wire Harness in Hook of Duct (x2).
Version 1.1
DC SC2020
11. Connect Wire Harness to Inverter Motor in the kit. (Figure 9)
(1) Connect Wire Harness to the Inverter Motor.
12. Install the Inverter Motor. (Figure 10)
(1) Install the Inverter Motor.
(2) Secure it by using the screw (x2) that are provided in the Kit.
05/2014
9-13
Figure 8 j0bs91005
Figure 9 j0bs91006
Installation/Removal
9.1.3 Duplex