Installation Environment - Fuji Xerox DocuCentre SC2020 Service Manual

DC SC2020
Version 1.1
Item
Surrounding A characteristic projection noise pressure
level during operation (Reference value)
(Bystander position) (Units: dB) *4
Non-duplex models
Surrounding A characteristic noise power level during
standby (reference value)
(Unit: B) *3
Non-duplex models
Surrounding A characteristic noise power level during
operation (reference value)
(Unit: B) *3
*1: Main Body Config: IOT+DUPLEX
*2: Full SYSTEM CONFIG: Main Unit + Option *5
*3: LwAd: Surrounding A characteristic power level = measured LwA (1 device) + 0.3 B
*4: LpAm: Surrounding A characteristic projection noise pressure level (Bystander position)
*5: DADF, STM etc. that is set as option
*6: No duplex
Table 2
20/20 IOT F/C mode
Main Unit*1 Full System*2
50.0 - 51.7
3.17*6 3.30*6 -
6.29*6 6.42*6 -
05/2014
6-12

6.1.10 Installation Environment

This machine can be operated under the following conditions:
• Temperature: 10 degree C to 32 degree C
-
• Humidity: 15 to 85% (with no condensation)
• Altitude: 0 to 2,500 m
-
-
General
6.1.10 Installation Environment