Machine Sizes And Basis Weights - Fuji Xerox DocuCentre SC2020 Service Manual

6.1.4 Machine Sizes and Basis Weights

The following are the sizes and weights of the individual products:(excluding toner)
6.1.4.1 Machine Sizes
Projecting sections such as label recesses are not included. The sizes are for when the Bypass Tray is
minimized.
The tolerance is +/-5 mm.
Platen glass top height is 515 mm. Optional STM mounting 28 mm.
Configuration
Product
Configuration UI IN Tray Module
Basic Model 1 "4.3"WQ PLTN Tray1+MSI
VGA
Basic Model 2 Tray1+MSI+STM
Basic Model 3 DADF Tray1+MSI
Basic Model 4 Tray1+MSI+STM
*1: For details on the machine sizes, refer to 6.1.4.3.
6.1.4.2 Machine Weights
Measurement Conditions:
Do not include Options, Paper, and New Toner Cartridges.
Include power cord.
Table 2
Configuration
IOT(PLATEN/IIT/Tray1)
IOT(DADF/IIT/Tray1/Dup)
DADF
PLTN Cover
STM
Dup Unit
FAX
Max Floor Weight Capacity (Reference value): 71kg
= Body + DADF + DUP + STM + FAX + Toner 4 + margin (Paper Tray full set)
6.1.4.3 Detailed Machine Sizes
1. Basic Model 1
Version 1.1
DC SC2020
Table 1
Machine Size (mm) *1
OUT Width *2 Depth
Output 595 586
Tray
595 586
body
Output 595 586
Tray
595 586
body
Main Unit Weight
43.0 kg or lighter
48.5 kg or lighter
6.5 kg or less
1.5 kg or less
11 kg or less
3.6 kg or less
0.3 kg or less
• Platen unit body (DC SC2020 Model-CPS)
Machine Size (W x D x H): 595mm x 586mm x 549mm (Figure 1)
Height *3
579
662
634
747
2. Basic Model 2
• Platen unit body (DC SC2020 Model-CPS) + STM (Option)
Machine Size (W x D x H): 595mm x 586mm x 662mm (Figure 3)
3. Basic Model 3
• DADF unit body (DC SC2020 Model-CPS DA)
Machine Size (W x D x H): 595mm x 586mm x 634mm (Figure 2)
05/2014
6-7
Figure 1 j0bs60001
Figure 2 j0bs60003
6.1.4 Machine Sizes and Basis Weights
General