Iot Feeder I/F Failure; Chain 4 - Fuji Xerox DocuCentre SC2020 Service Manual

004-310 IOT Feeder I/F Failure

BSD-ON:CH3.3
Communication failure occurred between IOT and FEEDER.
Cause/Action
1. Turn the power OFF and ON.
2. Turn the Power OFF and check for disconnection, shortage or contact failure of wire between STM
PWB J541 and DRIVE PWB J419.
3. Check for disconnection, shortage or contact failure of wire between DRIVE PWB
PWB J6.
4. If no problem is found, replace the following parts in sequence:
• STM PWB (PL 10.6)
• DRIVE PWB (PL 18.2)
• ESS PWB (PL 18.2)
Version 1.1
DC SC2020
J1 and ESS
05/2014
2-13

CHAIN 4

Troubleshooting