Fuji Xerox DocuCentre SC2020 Service Manual page 225

(2) Remove the Xero Unit.
Figure 2 j0bs40801
6. Wrap the removed Xero Unit by using a sheet of black paper or
store it in a black bag.
7. Remove the Deve Unit. (Figure 3)
(1) Remove the screw (long).
(2) Hold the Lever and remove the Deve Unit.
NOTE: When removing the Deve Unit, make sure the Rear
Deve Unit is lifted and be careful that the 1st BTR Unit is not
damaged.
Figure 3 j0bs40501
8. Remove the Deve Front Cover. (Figure 4)
Version 1.1
DC SC2020
(1) Lower the lever.
(2) Remove the Deve Front Cover in the direction of the
arrow.
Figure 4 j0bs40503
9. Cover the Pipe opening of Deve Rear Cover of the Deve Unit
with paper and tape. (Figure 5)
(1) Cover the Pipe opening with paper and tape.
Figure 5 j0bs40504
10. Store the Deve Unit in the collection bag.
11. Cover the Pipe opening of the Deve Rear Cover of the new
Deve Assembly with paper and tape. (Figure 6)
(1) Cover the Pipe opening with paper and tape.
05/2014
4-23
Figure 6 j0bs40504
12. Remove the Upper Cover of the new Deve Assembly. (Figure
7)
(1) Release the hook (x5).
(2) Remove the Upper Cover.
Figure 7 j0bs40505
13. Install the Deve Front Cover to the new Deve Assembly in
order to use as a Stand. (Figure 8)
Disassembly/Assembly and Adjustment
5. Development