Table of Contents
Advertisement
DC SC2020
Version 1.1
6.4.12.3 Procon Print
•
Print current value of NVM used in Procon.
The actual sample that will be printed out is described in
Operation Procedure
1.
Enter the CE Mode. (Refer to
"6.4.2
How to Enter the CE Mode")
2.
Make sure [Printer Diag] is selected, and then press [OK] button.
3.
Select [Parameter] with the [Down arrow] button and press the [OK] button.
4.
Select [Procon Print] with the [Down arrow] button and press the [OK] button.
Figure 1 j0bs64199
5.
Print out "Procon Print" by pressing the [OK] button.
Figure 2 j0bs64200
05/2014
6-246
"ADJ 8.1.5
ProCon/RegCon Print".
6.
Press the [<--] (Back) button to return to the [Printer Diag] screen.
Figure 3 j0bs64087
7.
Exit the CE mode. (See "6.4.4 How to Exit the CE Mode".)
General
6.4.12.3 Procon Print
Advertisement
Chapters
Table of Contents
Troubleshooting
