Job Ticket Media Error; Job Ticket Parse Error; System Nvm Initialize; Ess-Nvm Parameter Recover - Fuji Xerox DocuCentre SC2020 Service Manual

Print instruction contents that the device cannot execute are detected.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time.

016-572 Job ticket media error

BSD-ON:-
The paper attribute specified by XCPT (XPIF) cannot solve paper selection.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time.

016-573 Job ticket parse error

BSD-ON:-
XPIF parser detects error other than those listed above.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time.

016-602 System NVM Initialize

BSD-ON:-
At POWON start-up, execute NVM clear.
Cause/Action
Recover after message is displayed for 3 seconds. (When initialization is not completed, continue dis-
playing message.)

016-603 ESS-NVM Parameter Recover

BSD-ON:-
Executed ESS-NVM Parameter Recovery.
Cause/Action
No action is required.

016-604 ESS-NVM Parameter Copy

BSD-ON:-
Executed ESS-NVM Parameter Copy.
Cause/Action
No action is required.
Version 1.1
DC SC2020
016-605 ESS-NVM Parameter Copy
BSD-ON:-
Executed ESS-NVM Parameter Copy.
Cause/Action
No action is required.

016-606 Clear Job History

BSD-ON:-
Clear Job History.
Cause/Action
No action is required.

016-610 Panel Destination Mismatch

BSD-ON:-
Only for Production Line. Tried to apply JP setting to non-JP panel, or tried to apply non-JP setting to JP
panel.
Cause/Action
No action is required.

016-612 Invalid MAC Address

BSD-ON:-
Only for Production Line. MAC address is invalid.
Cause/Action
-Rewrite Mac address.-Update to the latest F/W.If the error persists after the action above is taken,
ensure that the error replicates after the printer is powered off and then on, and then replace the ESS
PWB. (PL 18.2)
If the problem cannot be solved, replace the printer.

016-718 Memory Over flow

BSD-ON:-
The current printing job process cannot be continued because the memory capacity is exceeded.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Deleting
the data by executing Clear Storage. -Execute 'Clear Storage' under 'Maintenance' in the Control Panel.
05/2014
2-27
CHAIN 16
Troubleshooting