Jpeg Dnl/Sof0 Error; Jbig Nf Error; Jpeg Eoi Error; Dfax Password Error - Fuji Xerox DocuCentre SC2020 Service Manual

DC SC2020
Version 1.1
Communication shutdown due to memory full.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Wait until
the Pending FAX Jobs will be sent. Or delete the Pending FAX data. -Try dividing the FAX data into
smaller blocks or converting the data to a smaller format. -Update to the latest F/W. If the error persists
after the action above is taken, ensure that the error replicates after the printer is powered off and then
on, and then replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

033-514 JPEG DNL/SOF0 Error

BSD-ON:-
In JPEG receive, cannot get data on the number of lines.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W.

033-515 JBIG NF Error

BSD-ON:-
In JPEG receive, cannot get color/monochrome multi-level data.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W.
If the problem cannot be solved, replace the ESS PWB.

033-516 JPEG EOI Error

BSD-ON:-
In JPEG receive, cannot detect EOI from encode data.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W.

033-517 DFAX Password Error

BSD-ON:-
Mismatch between DFAX Password and Fax/Scan Lock Password.
(PL 18.2)
05/2014
2-50
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. The pass-
word is incorrect. Enter the correct password. If you have forgotten your password, contact the system
administrator. Take corrective actions at the host side.

033-518 DFAX Fax Country is not set correctly

BSD-ON:-
When DFAX job is executed, Fax Country code is Unknown.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Set the
Country code correctly. Take corrective actions at the host side.

033-519 DFAX Fax Function is not available

BSD-ON:-
When DFAX job is executed, Fax function is not Enabled. When this error occurs at the same time as
033-518, 033-519 is displayed preferentially.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Set the
Fax function Enable. Take corrective actions at the host side.

033-520 JBF_ERROR_CALLBACK

BSD-ON:-
Callback function returns error.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W.
If the problem cannot be solved, replace the ESS PWB.

033-521 JBF_ERROR_MARKER_ABORT

BSD-ON:-
Detect ABORT marker.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W.
If the problem cannot be solved, replace the ESS PWB.
Troubleshooting
CHAIN 33
(PL 18.2)
(PL 18.2)