Fuji Xerox DocuCentre SC2020 Service Manual page 598

DC SC2020
Version 1.1
Table 1 Function Names and Details (Printer)
Function Description
Grid2 ESS Print ESS built-in grid pattern. This is to check the
print function.
Gradation ESS Print ESS built-in tiled pattern C, M, Y, and K from 0
up to 100% density.
No Image IOT Print a blank pattern of built-in IOT. This is to check
the IOT print function.
Procon OFF ESS Built-in ESS Procon chart with Procon: printed in OFF
mode.
Procon ON ESS Built-in ESS Procon chart with Procon: printed in ON
mode.
LPH Chart LM1 Print LPH line evaluation chart (LM1) of integrated
IOT.
LPH Chart IBY Print LPH line evaluation chart (IBY) of integrated
IOT.
ToneUp [C]5P Print Tone up Cyan chart. HBPL data for built-in ESS.
ToneUp [M]5P Print Tone up Magenta chart. HBPL data for built-in
ESS.
ToneUp [Y]5P Print Tone up Yellow chart. HBPL data for built-in
ESS.
ToneUp [K]5P Print Tone up Black chart. HBPL data for built-in ESS.
ToneDown [C]10P Print Tone down Cyan chart. HBPL data for built-in
ESS.
ToneDown [M]10P Print Tone down Magenta chart. HBPL data for built-
in ESS.
ToneDown [Y]10P Print Tone down Yellow chart. HBPL data for built-in
ESS.
ToneDown [K]10P Print Tone down Black chart. HBPL data for built-in
ESS.
Parameter Life Deve Displays the Print Volume of Deve Unit Y was used.
HSG PV Y
Deve Displays the Print Volume of Deve Unit M was used.
HSG PV
M
Deve Displays the Print Volume of Deve Unit C was used.
HSG PV
C
Deve Displays the Print Volume of Deve Unit K was used.
HSG PV K
Y Drum Displays the Print Volume of Drum Cartridge Y was
Ctrg PV used.
M Drum Displays the Print Volume of Drum Cartridge M was
Ctrg PV used.
05/2014
6-200
See Function
6.4.11.12 C Drum
Ctrg PV
6.4.11.13 K Drum
Ctrg PV
6.4.11.14 IBT Unit
2nd BTR
6.4.11.15 Unit
Fusing
6.4.11.16 Print
Count
6.4.11.17 Fusing
Time
Count
6.4.11.18
Deodor-
ant Filter
6.4.11.19
EEPROM
Write Cnt
6.4.11.20
Tray1 F/R/
N Roll
6.4.11.21
Tray2 F/R/
N Roll
6.4.11.22
MSI FR
Pad
6.4.11.23
Life Print
6.4.11.24
Procon
Print
6.4.11.25
RTC Set RTC Set
6.4.11.26 Exit Mode Com-
plete Exit
6.4.12.1
Table 2 Function Names and Details (Fax/Scanner)
6.4.12.1
Function
Board Diag All Test
6.4.12.1
Fax Mem-
ory Test
6.4.12.1
I/F Test
6.4.12.1
FX Chip
6.4.12.1
Test
6.4.6 CE Mode Functions Overview
Table 1 Function Names and Details (Printer)
Description
Displays the Print Volume of Drum Cartridge C was
used.
Displays the Print Volume of Drum Cartridge K was
used.
Displays the Print Volume of IBT Unit was used.
Displays the Print Volume of 2nd BTR Unit was used.
Displays the Print Volume of Fusing Unit was used.
Displays time used with the Fusing Unit.
Displays the Print Volume with deodorant Filter.
Displays number of times written to EEPROM.
Displays the Print Volume using Tray1 Feed Roll/
Retard Roll/Nudger Roll.
Displays the Print Volume using the Tray2 Feed Roll/
Retard Roll/Nudger Roll.
Displays the Print Volume using the MSI Feed Roll/
Retard Pad.
Print the Print Volume using the periodic replacement
parts.
Print current value of NVM used in Procon.
Set the RTC (Real Time Clock).
Exits from the CE Mode and reboots.
Description
Continually performs the Fax Memory, Fax Card I/F,
AFE Serial I/F, IIT I/F, and ASIC tests.
Fax Flash Performs write/read tests of the Fax Flash Memory.
W/R Test
MRAM Performs write/read tests of the Fax MRAM.
W/R Test
Fax Card Performs the communication test between Fax Card,
I/F Test AFE, and IIT.
Ready to Performs the ASIC built-in IJAC/JBIG test.
start
General
See
6.4.12.1
6.4.12.1
6.4.12.1
6.4.12.1
6.4.12.1
6.4.12.1
6.4.12.1
6.4.12.1
6.4.12.1
6.4.12.1
6.4.12.1
6.4.12.2
6.4.12.3
ADJ 8.1.5
6.4.13
6.4.4
See
6.4.14.1
6.4.14.2
6.4.14.2
6.4.14.3
6.4.14.4