Fuji Xerox DocuCentre SC2020 Service Manual page 683

6.6.4.10 Bit 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112
Description
EXT: Extend Field (Extended Field)
0 -> Indicates no data in the subsequent byte
1 -> Indicates data in the subsequent byte
Version 1.1
DC SC2020
6.6.4.11 Bit 21~23 Description
MSL: Minimum Scan Line (Minimum Scan Line Electrical Transmission Time Capability)
DIS (Minimum Scan Line Time
23 22 21 Capability)
0 0 0 20ms (3.85l/mm): T7.7=T3.85
1 0 0 40ms (3.85l/mm): T7.7=T3.85
0 1 0 10ms (3.85l/mm): T7.7=T3.85
0 0 1 5ms (3.85l/mm): T7.7=T3.85
1 1 0 10ms (3.85l/mm): T7.7=1/2 T3.85
0 1 1 20ms (3.85l/mm): T7.7=1/2 T3.85
1 0 1 40ms (3.85l/mm): T7.7=1/2 T3.85
1 1 1 0ms (3.85l/mm): T7.7=T3.85
• Displays the minimum scanning time per scan line for 7.7l/mm (High Quality) and 3.85l/mm (Stan-
dard) Slow Scan Linear Density of T7.7 and T3.85 respectively.
• T7.7=1/2 T3.85 means that the scanning time in High Quality mode is reduced to half of the scan-
ning time in Standard Mode.
• MSL is being ignored at ECM Communication.
05/2014
6.6.4.10 Bit 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112 Description
6-285
Table 1
DCS (Minimum Scan Line Time)
20ms
40ms
10ms
5ms
Not Used
Not Used
Not Used
0ms
General