Fuji Xerox DocuCentre SC2020 Service Manual page 7

Hide thumbs Also See for DocuCentre SC2020:
Table of Contents

Advertisement

0.1 Getting to know this Service Manual
This manual is used as the standard service manual for DocuCentre SC2020.
Publication Comment Sheet
Enter any comments and/or corrections regarding this service manual into the Publication Comment
Sheet, and send it to the following department.
Japan: Solution Service & Operational Management CS Dept.
APO/GCO: OSG PSD CS&SD SSOMG via OpCo Technical Service Department
Version 1.1
DC SC2020
0.2 How to use the Service Manual
This manual describes the standard procedures for the servicing this product. Refer to Chapter 1 Service
Call Procedure for efficient and effective servicing during maintenance calls.
For more information on the options, refer to the options manual.
2.1 Contents of Manual
This manual is divided into 10 chapters as described below.
Chapter 1 Service Call Procedure
This chapter describes the general work and servicing procedures for the maintenance of this prod-
uct.
Chapter 2 Troubleshooting
This chapter describes the troubleshooting procedures other than image quality troubleshooting for
this product.
Chapter 3 Image Quality Troubleshooting
This chapter describes the image quality troubleshooting procedures for this product.
Chapter 4 Disassembly/Assembly and Adjustment
This chapter describes the disassembly, assembly, adjustment and replacement procedures for
components of this product.
Chapter 5 Parts List
This chapter contains the spare parts information for this product.
Chapter 6 General
This chapter contains the following information.
6.1 Specifications
6.2 Tools/Service Consumables/Consumables
6.3 Service Data
6.4 Service Mode
6.5 Panel Diag
6.6 Fax Related Information
Chapter 7 Wiring Data
This chapter contains the information about the Wiring Connector List/Locations, the Wiring Data,
and the BSD for this machine.
Chapter 8 Accessories (not yet issued)
Chapter 9 Installation/Removal
This chapter contains the installation and removal procedures for this product and the options that
are specific to it.
Chapter 10 Mechanism & Functions Overview (not yet issued)
2.2 Information on Updating
This manual will be sent to each Service Center as specified below. Revisions must be incorporated cor-
rectly to keep the manual up-to-date.
Updating Procedure:
05/2014
0-3
0.1 Getting to know this Service Manual
Introduction

Advertisement

Table of Contents
loading

Table of Contents