Table of Contents
Advertisement
2. LCD shows [ AutoFit . ◄ OFF | ON ►], use the <◄/►> buttons to set this function on or off.
3. Press <Set> to confirm your setting.
Notes:
•
Default setting is OFF.
•
Auto Fit on/off setting only available under DocuPrint C2090FS work as fax receiver.
•
Auto Fit On support paper size: A4, B5, 8.5" x 11", 8.5" x 14"
•
Auto Fit Off support paper size: A4, 8.5" x 11", 8.5" x 14"
7.4.4
FAX Tx mode setting (Resolution)
To adjust the resolution of the fax document, do the following:
1. Press <FAX> button, the LCD will show [Set FAX Num Std] then press <Image Quality> button.
2. Use the <◄/►> buttons to select [FAX Tx mode] and press <Set>
3. Use the <◄/►> to select [Standard], [Fine], [Super fine], or [Ultra fine].
4. Press <Set> to confirm your setting.
Notes:
•
Stand Mode: 200 x 100 dpi
•
Fine mode : 200 x 200 dpi
•
Super Fine mode : 200 x 400 dpi
•
Ultra Fine mode : 400 x 400 dpi
•
Photo type only support when TX mode setting to fine or ultra fine
•
Default setting is Standard.
All manuals and user guides at all-guides.com
- 72 -
Advertisement
Table of Contents
