Fuji Xerox DocuCentre SC2020 Service Manual page 215

Figure 1 j0bs40219
9. Move the LPH (K) to the Front. (Figure 2)
(1) Move the LPH (K) to the Front until it stops.
Figure 2 j0bs40220
10. Push down the LPH (K) towards the direction of the arrow, and
place it so the Right side of LPH (K) is on the Top. (Figure 3)
(1) Push down the LPH (K) towards the direction of the arrow,
and place it so the Right side of LPH (K) is on the Top.
Version 1.1
DC SC2020
Figure 3 j0bs40221
11. Disconnect the LPH (K) Connector and remove the LPH (K).
(Figure 4)
(1) Push Buttons (x2) simultaneously towards the direction of
the arrow and straightly remove the FFC Cable.
Figure 4 j0bs40213
Reference: This shows the removed LPH (K). (Figure 5)
05/2014
4-13
Figure 5 j0bs40222
Replacement
1. To install, carry out the removal steps in reverse order.
2. When connecting the FFC Cable, insert the FFC Cable
straightly into the Connector Housing until you hear the Lock
sound. (Figure 6)
Figure 6 j0bs40214
3. When installing the LPH, insert the LPH Tab on the Bottom into
the mounting hole of the Marking Guide. (Figure 7)
Disassembly/Assembly and Adjustment
2. LPH