Control Channel Off Time Out; Primary Channel Off Time Out; Dm Prevention Function Receive Refuse; Manual Transmission Read Manuscript Not Do - Fuji Xerox DocuCentre SC2020 Service Manual

• ESS PWB (PL 18.2)

033-760 Control Channel OFF Time Out

BSD-ON:-
The Control Channel OFF Time Out occurred.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W. If the problem cannot be
solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

033-761 Primary Channel OFF Time Out

BSD-ON:-
The Primary Channel OFF Time Out occurred.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W. If the problem cannot be
solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

033-762 DM Prevention Function Receive Refuse

BSD-ON:-
DM prevention function rejects to receive data.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Setting
the receiving side fax. Set the Speed Dial. -Update to the latest F/W. If the error persists after the action
above is taken, ensure that the error replicates after the printer is powered off and then on, and then
replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

033-763 Manual Transmission Read Manuscript Not Do

BSD-ON:-
Version 1.1
DC SC2020
In manual send, cannot make document read on time.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W. If the problem cannot be
solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

033-764 Draw Data Create Not Do

BSD-ON:-
When sending, cannot make image data creation on time.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W. If the problem cannot be
solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

033-765 File Pointer Error

BSD-ON:-
In encode/decode, Read/Write file pointer error.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W. If the problem cannot be
solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

033-766 Target File Opening

BSD-ON:-
In decode, encoding target file open.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W. If the problem cannot be
solved, replace the following parts in sequence.
05/2014
2-53
CHAIN 33
Troubleshooting