Fuji Xerox DocuCentre SC2020 Service Manual page 583

Chain-Link NVM Name
825-016 External Telephone Call Time
(Time to Ring a sound from speaker if CNG is
not detected after incoming call)
825-017 External Telephone Call Time during TEL/FAX
Switch Mode
825-018 External Telephone Call Time during Answer-
ing Machine Connection Mode
825-019 Call Time for FAX only
825-025 (14/0.5)Ring Signal Cycle Minimum Value
825-026 (100/0.5)Ring Signal Cycle Maximum Value
825-027 Dial Tone Frequency
825-028 Busy Tone Frequency
825-029 Busy Tone Pattern
825-030 Allow/Prohibit Busy Tone Detection during out-
going call
825-031 No. of Resend
Version 1.1
DC SC2020
Table 1 6.3.22 System_Data (FAX Service)
Detailed Description
Setting of detection possible cycle of Ring Signal
(1step=0.5ms)
Setting of detection possible cycle of Ring Signal
(1step=0.5ms)
Dial Tone Detection possible frequency setting.
It is unused.
Busy Tone Detection possible frequency setting
Busy Tone Detection possible Pattern Setting
Busy Tone Detection Setting
Making the outgoing call again for no. of this system data shall
be decided by the following requirements.
[When Busy Tone Detection[Prohibited]]
· Error occurred during FAX communication
[When Busy Tone Detection[Allowed]]
· Error occurred during FAX communication
· End when destination does not answer
05/2014
6-185
OFF/ON Default Value Setting Range
21 0~255: 0s~255s
O 6 0~255: 0s~255s
O 21 0~255: 0s~255s
O 0 0~255: 0s~255s
28 8~255: 4ms~127.5ms
200 8~255: 4ms~127.5ms
3 0: 350Hz~450Hz
1: 300Hz~500Hz
2: 450Hz~650Hz
3: 245Hz~650Hz
3 0: 400Hz
1: 350Hz~450Hz
2: 300Hz~500Hz
3: 450Hz~650Hz
4: 245Hz~650Hz
1 0: ON/OFF 0.4~0.6s (2 times)
1: ON/OFF 0.2~0.3s (4 times), ON/
OFF 0.4~0.6s (2 times)
2: ON/OFF 0.2~0.3s (4 times)
3: ON/OFF 0.12~0.44s (3 times)
4: ON/OFF 0.3~0.8s (2 times)
5: ON/OFF 0.2~0.6s (2 times)
6: ON/OFF 0.5~1s (2 times)
7: ON/OFF 0.12~1.2s (2 times)
8: ON 800~1.2S,OFF 3.2~4.8s (2
times)
1 0: Prohibit
1: Allowed
O 1 0~5: 0time~5times
6.3.22 System_Data (FAX Service)
General