Fusing Unit; Rep 7.1.1 (Scc) Fusing Unit - Fuji Xerox DocuCentre SC2020 Service Manual

Hide thumbs Also See for DocuCentre SC2020:

Table of Contents

Parts List on

When turning OFF the power switch, check that the "Data"

lamp is OFF and that there is no Job in progress.

Turn OFF the Power Switch and make sure that the screen dis-

play or energy-saving LED is turned off.

Check that the power switch is OFF and unplug the power plug.

Do not work on a hot Fusing Unit until it is cool enough.

Open the L/H Cover.

Remove the Fusing Unit. (Figure 1)

(1) Loosen the screw (x2).

(2) Remove the Fusing Unit.

Figure 1 j0bs40701

To install, carry out the removal steps in reverse order.

Enter the CE Mode after installation and initialize the Printer

Diag > Parameter > Life > Fusing Unit Print Count and the Fus-

ing Unit Time Count and initialize the Life Counter.

Disassembly/Assembly and Adjustment

7. Fusing Unit

Table of Contents