G3 Send Rtn/Pin Receive; Receive Pin; T2 Time Out; G3 Receive Rtn Send - Fuji Xerox DocuCentre SC2020 Service Manual

DC SC2020
Version 1.1

035-709 G3 Send RTN/PIN Receive

BSD-ON:-
In G3 send, receive RTN/PIN.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Checking
the telephone line connection. Reconnect the telephone line connector. -Checking the sending side fax.
Receive the fax data from known good fax machine. -Update to the latest F/W. If the error persists after
the action above is taken, ensure that the error replicates after the printer is powered off and then on, and
then replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

035-710 Receive PIN

BSD-ON:-
PIN receive (excl. EOR).
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Checking
the telephone line connection. Reconnect the telephone line connector. -Checking the sending side fax.
Receive the fax data from known good fax machine. -Update to the latest F/W. If the error persists after
the action above is taken, ensure that the error replicates after the printer is powered off and then on, and
then replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

035-716 T2 Time Out

BSD-ON:-
T2 timeout.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Checking
the telephone line connection. Reconnect the telephone line connector. -Checking the sending side fax.
Receive the fax data from known good fax machine. -Update to the latest F/W. If the error persists after
the action above is taken, ensure that the error replicates after the printer is powered off and then on, and
then replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
05/2014
2-62

035-717 G3 Receive RTN Send

BSD-ON:-
In G3 receive, send RTN.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Checking
the telephone line connection. Reconnect the telephone line connector. -Checking the sending side fax.
Receive the fax data from known good fax machine. -Update to the latest F/W. If the error persists after
the action above is taken, ensure that the error replicates after the printer is powered off and then on, and
then replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

035-718 Receive T1 Time Out

BSD-ON:-
In receive, T1 timeout.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Checking
the telephone line connection. Reconnect the telephone line connector. -Checking the sending side fax.
Receive the fax data from known good fax machine. -Update to the latest F/W. If the error persists after
the action above is taken, ensure that the error replicates after the printer is powered off and then on, and
then replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

035-720 Not Receive Ability

BSD-ON:-
Remote device has no ability to receive.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Checking
the telephone line connection. Reconnect the telephone line connector. -Checking the sending side fax.
Receive the fax data from known good fax machine. -Update to the latest F/W. If the error persists after
the action above is taken, ensure that the error replicates after the printer is powered off and then on, and
then replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
Troubleshooting
CHAIN 35