Fuji Xerox DocuCentre SC2020 Service Manual page 812

DC SC2020
Version 1.1
Figure 10 j0bs91007
13. Reinstall the parts that were removed in Steps 5 to 7.
14. Remove the Hinge Rear Cover. (Figure 11)
(1) Remove the screw.
(2) Remove the Hinge Rear Cover.
Figure 11 j0bs41301
15. Disconnect the connector. (Figure 12)
(1) Release the wire harness from the clamp.
(2) Disconnect the connector.
05/2014
9-14
16. Remove the MSI. (Figure 13)
(1) Remove the screw (x2).
(2) Remove the MSI.
17. Pull out Tray 1 slightly and remove the screw that secures the Hinge Front Cover. (Figure 14)
(1) Remove the screw.
Installation/Removal
Figure 12 j0bs41302
Figure 13 j0bs41303
9.1.3 Duplex