Fuji Xerox DocuCentre SC2020 Service Manual page 577

6.3.20 NVM 767_Marking System 1 List
Chain-Link NVM Name
767-024 CRUM Mode Switch
767-042 Color Mode Determination Switch
767-043 Latest Color Mode
767-047 1st BTR Initialize Operation Switch
767-059 Lead Image Loss Amount
767-060 Side Image Loss Amount
767-061 End Image Loss Amount
767-127 Lead Edge Erase Amount
767-128 Side Erase Amount
767-129 Tail Edge Erase Amount
Version 1.1
DC SC2020
Table 1 NVM 767_Marking System 1 List
Default Minimum Maximum
Value value value Description
0 0 1 Mode Change Switch
0: N/A, 1: Change to Xerox Mode
1 0 1 0: Maintain the latest status, 1: Follow the Cont instruction
1 0 1 0: BW, 1: 4C
1 0 2 0: Do not perform.
1: Only perform when Power On.
2: Perform in Power On, Interlock Close, Sleep Recovery.
40 40 255 The amount of image erasure at the Lead Edge in the paper feed direction for the
printed image
20 20 255 The amount of image erasure at the Lead Edge in the paper feed direction for the
printed image
20 20 255 The amount of image erasure at the Rear End in the paper feed direction for the printed
image
40 40 255 Lead Edge Erase Amount
20 20 255 Side Edge Erase Amount
20 20 255 Tail Edge Erase Amount
05/2014
6-179
Write
Allowed/ Can be
Unit Protected initialized
- O O
- O O
- O O
- O O
0.1[mm] O O
0.1[mm] O O
0.1[mm] O O
0.1[mm] O O
0.1[mm] O O
0.1[mm] O O
6.3.20 NVM 767_Marking System 1 List
General