Fuji Xerox DocuCentre SC2020 Service Manual page 829

Hide thumbs Also See for DocuCentre SC2020:

Table of Contents

Figure 12 j0bs41907

21. Close the Front Cover.

22. Install the Odor Filter from the Kit. (Figure 13)

(1) Peel off the double-sided tape of the Odor Filter and attach to the Rear Cover.

(2) For the attachment position (left/right) of the Odor Filter, align with the triangle mark (4) of the

(3) For the attachment position (top/bottom) of the Odor Filter, flatten the Top Side of the Rear

Cover and the Odor Filter.

Figure 13 j0bs41917

23. Enter CS Mode after installing and set the Chain Link [741-006] value from "0" (No Odor Filter) to

"1" (With Odor Filter) with Printer Diag > IOT Diag > NVM Settings > Edit NVM.

NOTE: When replacing, initialize with CS Mode > Printer Diag > Parameter > Life > Deodorant Filter

to reset the life counter.

9.1.7 Odor Filter Kit

Installation/Removal

Chapters

Table of Contents