Fuji Xerox DocuCentre SC2020 Service Manual page 91

Cause/Action
1. Check to see if there is any source of heat that may influence the device.
2. Leave the device Powered ON and wait for a while (30-40min). Continue to cool with the Fan until
the temperature inside the device drops.
3. If the problem persists, replace the following parts in sequence:
• DRIVE PWB (PL 18.2)
• ESS PWB (PL 18.2)
Version 1.1
DC SC2020
05/2014
2-69
CHAIN 42
Troubleshooting