Fuji Xerox DocuCentre SC2020 Service Manual page 650

DC SC2020
Version 1.1
Figure 1 j0bs64170
3. Use the [Down arrow] button to select [Fax/Scanner Diag], and press the [OK] button.
4. Press the [OK] button.
Figure 2 j0bs64128
5. Use the [Down arrow] button to select [Relay/Signal Test], and press the [OK] button.
05/2014
6-252
6. Use the [Down arrow] button to select [DTMF Send], and press the [OK] button.
7. Press the [OK] button.
6.4.14.5 Relay/Signal Test
Figure 3 j0bs64129
Figure 4 j0bs64130
Figure 5 j0bs64131
General