DC SC2020
Version 1.1
Indicates that it is time to replace Deve HSG K.
Cause/Action
Prepare a new Deve Unit (K) as the replacement time of the Deve Unit (K) is approaching. In addition,
replace the Deve Unit (K) as necessary.
(PL
After replacing, enter CE Mode, go to Printer Diag > Parameter > Life > Deve HSG PV K and initialize the
Life Counter.
093-418 Deve HSG Y Life Over
BSD-ON:-
Indicates Deve HSG Y reached its usage limit. (Capable of Print operation)
Cause/Action
Replace the Deve Unit (Y).
(PL
5.1)
After replacing, enter CE Mode, go to Printer Diag > Parameter > Life > Deve HSG PV Y and initialize the
Life Counter.
093-419 Deve HSG M Life Over
BSD-ON:-
Indicates Deve HSG M reached its usage limit. (Capable of Print operation)
Cause/Action
Replace the Deve Unit (M).
(PL
5.1)
After replacing, enter CE Mode, go to Printer Diag > Parameter > Life > Deve HSG PV M and initialize the
Life Counter.
093-420 Deve HSG C Life Over
BSD-ON:-
Indicates Deve HSG C reached its usage limit. (Capable of Print operation)
Cause/Action
Replace the Deve Unit (C).
(PL
5.1)
After replacing, enter CE Mode, go to Printer Diag > Parameter > Life > Deve HSG PV C and initialize the
Life Counter.
093-423 Toner Y Near Life
BSD-ON:CH9.5
Indicates the replacement time of Toner Cartridge (Y) is closer than Pre Near.
5.1)
05/2014
2-98
Cause/Action
Prepare a new Toner Cartridge (Y). Replace the Toner Cartridge (Y) as required.
093-424 Toner M Near Life
BSD-ON:CH9.5
Indicates the replacement time of Toner Cartridge (M) is closer than Pre Near.
Cause/Action
Prepare a new Toner Cartridge (M). Replace the Toner Cartridge (M) as required.
093-425 Toner C Near Life
BSD-ON:CH9.6
Indicates the replacement time of Toner Cartridge (C) is closer than Pre Near.
Cause/Action
Prepare a new Toner Cartridge (C). Replace the Toner Cartridge (C) as required.
093-426 Toner K Near Life
BSD-ON:CH9.6
Indicates the replacement time of Toner Cartridge (K) is closer than Pre Near.
Cause/Action
Prepare a new Toner Cartridge (K). Replace the Toner Cartridge (K) as required.
093-925 Toner K CRUM Communication Fail
BSD-ON:CH9.6
Detected communication abnormality with CRUM of Toner Cartridge (K).
Cause/Action
1.Turn the power OFF and ON.
2.Turn OFF the power and check the following:
•
Disconnection, shortage or contact failure of wire between DRIVE PWB
CRUM Connector Assembly (K) J104.
Troubleshooting
CHAIN 93
(PL
5.1)
(PL
5.1)
(PL
5.1)
(PL
5.1)
J406
and Toner