Regi. Sensor On Jam (Msi) - Fuji Xerox DocuCentre SC2020 Service Manual

075-101 Regi. Sensor On Jam (MSI)

BSD-ON:CH8.3,CH4.2,
During paper feed from the MSI, the Regi Sensor did not turn ON within the specified time after the MSI
Feed Clutch On.
Cause/Action
Check the following:
• Malfunction of Regi. Sensor (Digital Input[077-104]).
• Malfunction of Sub Motor (Digital Output[042-003]).
• Malfunction of MSI Feed Clutch (Digital Output[075-001].
• The MSI Feed Roll and the MSI Nudger Roll for contamination, wear, and transportation failure due
to deterioration.
• The Drive Gear for wear and damage.
• A paper transportation failure due to foreign substances on the paper path.
• Usage of out of spec paper.
If no problem is found, replace the following parts in sequence:
• DRIVE PWB (PL 18.2)
• ESS PWB (PL 18.2)
Version 1.1
DC SC2020
(PL 15.1)
(PL 3.4)
(PL 13.3)
05/2014
2-85
CHAIN 75
Troubleshooting