Fuji Xerox DocuCentre SC2020 Service Manual page 697

Hide thumbs Also See for DocuCentre SC2020:

Table of Contents

6.6.5.3 V.8 Operation / Auto Send

[Super G3 Fax] can communicate with conventional Fax in standards other than V.34 (28.8K), such as

V.17 (14.4K) and V.29/V.27ter (9600/4800). Communication procedure is selected following the flow

below based on the capability of the remote station/detected signal.

Below is the flow when either the incoming or outgoing terminal or both has [Super G3 Fax] capability

and Auto Send takes place at the outgoing terminal.

Figure 2 j0mf2718

Figure 1 j0mf2719

6.6.5.3 V.8 Operation / Auto Send

Chapters

Table of Contents