Fuji Xerox DocuCentre SC2020 Service Manual page 660

DC SC2020
Version 1.1
6.4.16.6 Component Check (IIT)
Checks the IIT I/O components operation.
6.4.16.6.1 IIT Input
Procedure
1. Use the [Down arrow] button to select [Component Check], and press the [OK] button.
Figure 1 j0bs64181
2. Press the [OK] button to select [IT Input].
Figure 2 j0bs64182
3. Press the [OK] button.
Figure 3 j0bs64183
Table 1 Component Check Input
Chain Link Parameter
062 201 Sheet Abort
062 212 IIT Regi Sensor
05/2014
6-262
Table 1 Component Check Input
Chain Link Parameter
062 240 ADF Exist
062 251 APS Sensor1
062 253 APS Sensor2
062 272 ScanStart
062 300 Platen I/L Switch
062 301 Angle Sensor
6.4.16.6.2 IIT Output
Procedure
1. Use the [Down arrow] button to select [Component Check], and press the [OK] button.
2. Use the [Down arrow] button to select [IIT Output], and press the [OK] button.
3. Press the [OK] button.
6.4.16.6 Component Check (IIT)
Figure 4 j0bs64181
Figure 5 j0bs64184
General