Storage; Installation Conditions For The Motor - Siemens SINAMICS G115D Operating Instructions Manual

Additional information on the SIMOGEAR geared motor
11.2 Specific data motor
11.2.7

Storage

Danger of serious injuries caused by falling objects
Danger of damage to the motor when stacked
Do not stack gearboxes or geared motors on each other.
NOTICE
Failure of the exterior protection
Mechanical damage, chemical damage and thermal damage, such as scratches, acids,
alkalis, sparks, welding beads and heat cause corrosion.
Do not damage the paint finish.
Unless contractually agreed otherwise, the warranty period for the standard preservative lasts
6 months from the date of delivery.
In the case of storage in transit over 6 months, special arrangements must be made for
preservation. Please contact Technical Support.
Store the gearbox or geared motor in dry, dust-free rooms that are maintained at a constant
temperature.
The storage location must be vibration- and shock-free.
The free shaft ends, sealing elements and flange surfaces must have a protective coating.
Do not store the geared motor on the fan cover.
Storage up to 36 months (optional)
Store the gearbox or geared motor in dry, dust-free rooms that are maintained at a constant
temperature. Special packing is then not necessary.
If such premises are not available, pack the gearbox or the geared motor in plastic film or air-
tight sealed film and materials. The films and materials must be able to absorb moisture.
Cover them to provide protection against heat, direct sunlight and rain.
The permissible ambient temperature is -25 °C to +50 °C.
The life of the corrosion protection is 36 months from delivery.
11.2.8

Installation conditions for the motor

NOTICE
Risk of overheating due to insufficient cooling
Protect intake and discharge openings against blockages and coarse dust.
The cooling air must flow unimpeded into the air intakes and flow out through the air
outlets.
Exhaust air should not be drawn back in again.
376
WARNING
Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B
SINAMICS G115D distributed drive