Unpacking The Cabinets; Removing The Packaging; Figure 4-5 Transporting A Transportation Unit (Still In Packaging) With A Crane - Siemens SINAMICS SH150 Operating Instructions & Installation Instructions

Preparations for use

4.4 Unpacking the cabinets

3. Pay attention to the center of gravity imprinted on the box
4. Carefully raise the transportation unit.
See also
Transport with a fork-lift truck (Page 46)
Transport with a crane (Page 47)
4.4 Unpacking the cabinets
4.4.1

Removing the packaging

NOTICE
Material damage caused by incorrect storage of unpacked equipment
Proper packaging ensures that the equipment is protected. Unpackaged equipment may be
damaged if it is stored or out of service over a long period.
● Carefully comply with the instructions for storage in Chapters "Storage" and "Technical
● Remove the packaging immediately prior to installation.
50
③
the ropes .
①
Spreader beam
②
Center of gravity
③
Imprinted position of the rope
Figure 4-5 Transporting a transportation unit (still in packaging) with a crane
data and drawings".
②
and the imprinted position of
SINAMICS SH150 6SL3805
Operating Instructions 05/2020