Nortel DMS-100 Series Maintenance Manual page 311

Replacing a card in an RLCM-EDC
At the RLCM-EDC cabinet
1 Proceed if you have been directed to this procedure from a step in a
maintenance procedure. If you use this procedure separately, you can cause
equipment damage or loss of service.
2
WARNING
Static electricity damage
Wear a wrist strap that connects to the wrist-strap
grounding point on the frame supervisory panel (FSP)
to handle cards. The wrist strap protects the cards
from static electricity damage.
Put on a wrist strap.
3 Locate the card to be removed on the correct shelf.
RLCM-EDC card replacement procedures 6-123
RLCM-EDC
DMS-100 Family Maintenance Manual ABSK007
Replacing a card
(continued)