Rlcm-Edc Recovery Procedure - Nortel DMS-100 Series Maintenance Manual

4-2 4-2 RLCM-EDC recovery procedures

RLCM-EDC recovery procedure

Alarm display
CM
.
Application
Use this procedure to recover service in an RLCM-EDC when both units of
the RLCM-EDC are out of service. This condition produces a central-side
busy (CBsy) alarm. Use this procedure only when an alarm clearing
procedure refers to the procedure.
Action
The flowchart that follows provides an overview of the procedure. Use the
instructions in the step-action procedure that follows the flowchart to
perform the recovery task.
Note: The numbers in the flowchart do not coincide with step-action
numbers. Instead, the numbers indicate navigation within the flowchart.
297-8381-550 Standard 02.02 April 1999
4-2
MS IOD Net
. . .
PM CCS Lns
nLCM . .
*C*
Trks Ext Appl
. . .