Nortel DMS-100 Series Maintenance Manual page 234

6-46 RLCM-EDC card replacement procedures
NT2X59
in RMM
(continued)
9
At the MAP display
10
11
297-8381-550 Standard 02.02 April 1999
b. Close the locking levers.
Use the following information to determine the next step in this procedure.
If you enter this procedure from
a procedure that clears an alarm
other than listed here
To load the RMM, type
>LOADPM
and press the Enter key.
To test the RMM, type
>TST
and press the Enter key.
Do
step 16
step 10