8
Press the RESET button.
If the CONVERTER FAIL LED
is lit
is not lit
9
The reason for this procedure will determine the next action.
If
maintenance procedure directs
you to this procedure
maintenance procedure does not
direct you to this procedure
10
Return to the maintenance procedure that sends you to this procedure.
Continue as directed.
11
For additional help, contact the next level of maintenance.
12
The procedure is complete.
RLCM-EDC card replacement procedures 6-77
Do
step 11
step 9
Do
step 10
step 12
DMS-100 Family Maintenance Manual ABSK007
NT6X36
NT6X36
in FSP
in FSP
(continued)
(end)